MSZ EN 60601-2-64:2015

Gyógyászati villamos készülékek. 2-64. rész: Könnyűionsugaras gyógyászati villamos készülékek alapvető biztonságra és lényeges működésre vonatkozó követelményei (IEC 60601-2-64:2014)

Medical electrical equipment. Part 2-64: Particular requirements for the basic safety and essential performance of light ion beam medical electrical equipment (IEC 60601-2-64:2014)


Replacement: This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of LIGHT ION BEAM ME EQUIPMENT, hereafter referred to as ME EQUIPMENT, used for treatment of PATIENTS. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. This particular standard, with the inclusion of TYPE TESTS and SITE TESTS, applies respectively to the manufacture and some installation aspects of LIGHT ION BEAM ME EQUIPMENT – intended for RADIOTHERAPY in human medical practice, including those in which the selection and DISPLAY of operating parameters can be controlled automatically by PROGRAMMABLE ELECTRONIC SUBSYSTEMS (PESS), – that, in NORMAL USE, deliver a RADIATION BEAM of LIGHT IONS having ENERGY PER NUCLEON in the range 10 MeV/n to 500 MeV/n, and – intended to be – for NORMAL USE, operated under the authority of appropriately licensed or QUALIFIED PERSONS by OPERATORS having the required skills for a particular medical application, for particular SPECIFIED clinical purposes maintained in accordance with the recommendations given in the INSTRUCTIONS FOR USE, – subject to regular quality assurance performance and calibration checks by a QUALIFIED PERSON. NOTE 1 In this particular standard, all references to installation refer to installation in the RESPONSIBLE ORGANIZATION’S premises. NOTE 2 In this particular standard, all references to ABSORBED DOSE refer to ABSORBED DOSE in water. NOTE 3 Information regarding x-ray image guidance can be found in IEC 60601-2-68 (under development). NOTE 4 IEC 61217 gives guidance on the designation of ME EQUIPMENT movements, the marking of scales, their zero positions and the direction of movement with increasing value (see 201.7.4.101). Replacement: The object of this particular standard is to establish particular BASIC SAFETY and ESSENTIAL PERFORMANCE requirements for LIGHT ION BEAM ME EQUIPMENT in the range 10 MeV/n to 500 MeV/n and to SPECIFY tests to check compliance to those requirements. NOTE The adoption of this standard helps to ensure that the ME EQUIPMENT – maintains PATIENT safety during ME EQUIPMENT movements and failure of the SUPPLY MAINS; – delivers the pre-selected RADIATION TYPE, ENERGY PER NUCLEON, LIGHT ION species, and ABSORBED DOSE; – delivers pre-selected LIGHT ION BEAMS to the PATIENT, by utilizing LIGHT ION BEAM modifying devices, etc., without causing unnecessary risk to the PATIENT, the OPERATOR, other persons or the environment.

Általános információk

Érvényes
angol
: 2015-12-01

11.040.60 - Terápiai berendezések

MSZT/MB 843  Gyógyászati villamos készülékek

: idt EN 60601-2-64:2015; idt IEC 60601-2-64:2014


Vásárlás

: 13 170,0 Ft
(papír , PDF-fájl-letöltés)



Szabvány életútja

Előzmények

Jelenleg nincsenek előzmények

Megtekintett szabvány
MSZ EN 60601-2-64:2015

2015-12-01

Utódok

Jelenleg nincsenek utódok