MSZ EN 80601-2-35:2010

Gyógyászati villamos készülékek. 2-35. rész: Gyógyászati használatú melegítőtakarók, -párnák és -matracok fűtőkészülékeinek alapvető biztonsági és lényeges teljesítőképességi követelményei (IEC 80601-2-35:2009)

Medical electrical equipment. Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use (IEC 80601-2-35:2009)


Clause 1 of the general standard1) applies, except as follows: 201.1.1 * Scope Replacement: This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HEATING DEVICES using BLANKETS, PADS or MATTRESSES in medical use, also referred to as ME EQUIPMENT. HEATING DEVICES intended to prewarm a bed are included in the scope of this International Standard. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. If a clause or subclause is specifically intended to apply to a specifically defined type of ME EQUIPMENT, as is the case with FORCED AIR DEVICES, then the clause or subclause is entitled as such. Clauses or subclauses that apply to all types of ME EQUIPMENT within the scope of this standard are not specifically entitled. HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this standard are not covered by specific requirements in this standard except in 7.2.13 and 8.4.1 of the general standard. NOTE See also 4.2 of the general standard. This particular standard does not apply to: – HEATING DEVICES intended for physiotherapy; – radiant warmers; for information, see IEC 60601-2-21 [12]2; – incubators; for information, see IEC 60601-2-19 [10]; – transport incubators, for information, see IEC 60601-2-20 [11]; – cooling devices. 201.1.2 Object Replacement: The object of this particular standard is to establish particular BASIC SAFETY and ESSENTIAL PERFORMANCE requirements, which minimize HAZARDS to PATIENTS, and OPERATORS for heating Túl hosszú

Általános információk

Érvényes
angol
: 2010-04-01

11.140 - Kórházi berendezések 11.040.01 - Orvosi berendezések általában

MSZT/MB 843  Gyógyászati villamos készülékek

: idt IEC 80601-2-35:2009; idt EN 80601-2-35:2009; idt EN 80601-2-35:2009/AC:2015

: MSZ EN 80601-2-35:2009/A1:2017; MSZ EN 80601-2-35:2009/A11:2012

: 2016/06: Helyesbítés

Vásárlás

: 13 900,0 Ft
(papír , PDF-fájl-letöltés)



Szabvány életútja

Előzmények
Megtekintett szabvány
MSZ EN 80601-2-35:2010

2010-04-01

Utódok

Jelenleg nincsenek utódok